Specification
Pipes and Tubes
Seamless and Welded Pipe - Is available throughout Taurus Piping Solutions in accordance with material specification ASTM A312 and dimensional specification ANSI/ASME B36.19M and ANSI/ASME B36.10M.
Comprehensive stocks of seamless and welded pipe includes 6 NB (1/8") to 600 NB (16") in SCH 10S and SCH 40S. Seamless pipe is also available ex-stock in heavier schedules such as SCH 80S, SCH 160 and XXS.
Larger sizes of both seamless and welded pipe are readily available through our worldwide network of suppliers. All pipe is fully traceable and available in 6 m lengths.
Welded Tube - Taurus Piping Solutions stock welded tube in a variety of finishes to suit market needs. These include "as welded", "as welded polished", "welded bright annealed", "welded annealed polished", and others on request. Our standard size range covers 12.7 (1/2") to 152.4 mm (6") OD in 1.6 mm WT (16 SWG) and 203.2 mm (8") OD in 2.00 mm WT (14 SWG).
Materials in stock include 304 and 316 stainless steel to ASTM A269, ASTM A554 and AS1528.1 with other grades, standards or sizes available on request.
Seamless Tube - Taurus Piping Solutions leads the field in the supply of high quality instrument tube which is stocked throughout Australia and South East Asia specifically for use with compression fittings. The tube is dual graded, 316/316L and dual specified A269/A213 to not only cover instrumentation applications, but boiler, superheater and heat exchanger applications as well. All tube in sizes 4.76 (3/16") to 25.40 mm (1") OD inclusive are dual specified, contain 2.5% minimum molybdenum to provide maximum corrosion protection and are produced to a maximum hardness of RB 80.
Sizes from 25.4 (1") to 50.8 mm (2") are supplied to ASTM A269 TP316. High quality seamless tube from Taurus Piping Solutions is fully certifiable and available in standard 6 m lengths. Tube from 3.2 (1/8") to 12.7 mm (1/2") is available in coiled form with other sizes available on request.
Taurus Piping Solutions also holds stock of Monel 400, Duplex UNS S31803, 904L UNS N08904 and 6Mo UNS S31254 tube for applications where enhanced corrosion resistance is required.
Heat Exchanger Tube - Through our extensive network of overseas suppliers, Taurus Piping Solutions offers a comprehensive selection of heat exchanger and condenser tubes in a range of stainless and special alloys. Whether you require finned tube, u-tube or straight tube, please give us a call. We will be pleased to source your requirements.
Pipe Dimension / Weight
Pipes & Tube Properties
CHEMICAL COMPOSITION |
Mechanical Propent-size: 8pt |
|||||||||
Tensile Strength |
Yield stress |
Elongation In |
||||||||
Specification |
WT |
Type |
C% |
Mn% MAX |
P% MI | S% |
Si% |
Mpa |
Mpa |
50mm MIN Longitudinal |
ASTM A179 |
M/W |
CS |
0.06-0.18 |
0.27-0.63 |
0.048 | 0.058 |
-- |
-- |
-- |
-- |
ASTM A192 |
M/W |
CS |
0.06-0.18 |
0.27-0.63 |
0.048 | 0.058 |
0.25 MAX |
-- |
-- |
-- |
ASTM A210/ A1 |
M/W |
CS |
0.27 MAX |
0.93 MAX |
0.048 | 0.058 |
0.10 MAX |
312 MAX |
255 MIN |
30 |
DIN/17175/ST35.8 |
A/W |
CS |
0.17 MAX |
0.40 MIN |
0.040 | 0.040 |
0.35 MAX |
340-441 |
235 MIN |
25 |
DIN/17175/ST45.8 |
A/W |
CS |
0.22 MAX |
0.45 MIN |
0.040 | 0.040 |
0.10-0.35 |
441-540 |
255 MIN |
21 |
IS 3074 CDS1 |
A/W |
CS |
0.20 MAX |
0.30-0.60 |
0.050 | 0.050 |
-- |
432 |
373 |
-- |
IS 3074 CDS2 |
A/W |
CS |
0.10-0.18 |
0.40-0.80 |
0.050 | 0.050 |
-- |
432 |
373 |
-- |
IS 3074 CDS3 |
A/W |
CS |
0.10-0.18 |
0.40-0.80 |
0.050 | 0.050 |
-- |
432 |
373 |
-- |
IS 3074 CDS4 |
A/W |
CS |
0.10-0.18 |
0.60-0.90 |
0.050 | 0.050 |
-- |
569 |
461 |
-- |
IS 3074 CDS5 |
A/W |
CS |
0.10-0.18 |
0.60-0.90 |
0.050 | 0.050 |
-- |
687 |
589 |
-- |
DIN 2391 PART1 5T-35 |
-- |
CS |
0.17 |
>0.04 |
0.050 | 0.050 |
0.35 |
432 |
- |
5% |
DIN 2391 PART1 5T-45 |
-- |
CS |
0.21 |
>0.04 |
0.050 | 0.050 |
0.35 |
540 |
-- |
5% |
BS 6323 PART 4 |
-- |
CS |
0.25 MAX |
1.25 MAX |
0.050 | 0.050 |
0.35 |
520 |
415 |
5% |
